DOCSIS-CMTS-CM-DS-OFDM is an auxiliary schema that defines the CM's status information for OFDM downstream channels. Revision History: 3.5.1-B.1 Initial version. 3.7-B.2 OSSIDM-26 - Added constraints to TcsPhigh. 3.7-B.2.0.0 New revision naming convention. Contact: Postal: Cable Television Laboratories, Inc. 858 Coal Creek Circle Louisville, Colorado 80027-9750 U.S.A. Phone: +1 303-661-9100 Fax: +1 303-661-9199 Email: data-model-support@cablelabs.com Copyright 2019-2023 Cable Television Laboratories, Inc. All rights reserved. DOCSIS 3.1 CCAP Operations Support System Interface Specification CCAP-OSSIv3.1-N-15.1390-1 This attribute reports the P1.6hi value for the CM’s Transmit Channel Set QuarterdBmV Information Model Mapping: CM-SP-CCAP-OSSIv3.1 CmtsCmRegStatus::TcsPhigh This attribute reports the level of the top of the Dynamic Range Window. The value is expressed in dBmV and is the result of a calculation equal to P1.6hi - P1.6load_min_set QuarterdBmV Information Model Mapping: CM-SP-CCAP-OSSIv3.1 CmtsCmRegStatus::TcsDrwTop This attribute is the higher of the CCAP’s minimum supported downstream frequency and the CM’s minimum supported downstream frequency. It indicates the lowest downstream frequency the CCAP can use to communicate with this CM taking into account the capabilities of both devices. hertz Information Model Mapping: CM-SP-CCAP-OSSIv3.1 CmtsCmRegStatus::MinUsableDsFreq This attribute is the lower of the CCAP’s maximum supported downstream frequency and the CM’s maximum supported downstream frequency. It indicates the highest downstream frequency the CCAP can use to communicate with this CM taking into account the capabilities of both devices. hertz Information Model Mapping: CM-SP-CCAP-OSSIv3.1 CmtsCmRegStatus::MaxUsableDsFreq