!!IMPORTANT!! This file has a bug causing bad data to be generated. DO NOT ATTEMPT TO USE. Use the latest file from mibs.cablelabs.com in the 3.0 DOCSIS-CM directory instead: 3.0/xsd/ipdr/DOCSIS-CM/ DOCSIS-CM is an auxiliary schema which defines CM information. Revision History: 3.5.1-A.1 Initial version. 3.5.1-A.2 Revised version includes ECN OSSIv3.0-N-12.1073-3 and published as I20. 3.5.1-A.3 Revised version includes ECN OSSIv3.0-N-12.1083 and published as I21. 3.7-B.3.0.0 New revision naming convention. Contact: Postal: Cable Television Laboratories, Inc. 858 Coal Creek Circle Louisville, Colorado 80027-9750 U.S.A. Phone: +1 303-661-9100 Fax: +1 303-661-9199 Email: data-model-support@cablelabs.com Copyright 2019-2023 Cable Television Laboratories, Inc. All rights reserved. DOCSIS 3.1 CCAP Operations Support System Interface Specification CM-SP-CCAP-OSSIv3.1-I26-230613 other initialRanging rangingAutoAdjComplete startEae startDhcpv4 startDhcpv6 dhcpv4Complete dhcpv6Complete startConfigFileDownload configFileDownloadComplete startRegistration registrationComplete operational bpiInit forwardingDisabled rfMuteAll This attribute demotes the MAC address of the CM. If the CM has multiple MAC addresses, this is the MAC address associated with the MAC Domain interface. When the record is a Group Service Flow, the MAC address should contain a multicast address compliant with either [RFC 2464] or [RFC 1112] as applicable Information Model Mapping: CM-SP-CCAP-OSSIv3.1 CmtsCmRegStatus::MacAddr This attribute uniquely identifies a CM. Information Model Mapping: CM-SP-CCAP-OSSIv3.1 CmtsCmRegStatus::Id This attribute demotes the IPv4 address of the CM. If the CM has no IP address assigned, or the IP address is unknown, this object returns 0.0.0.0. If the CM has multiple IPv4 addresses, it contains the IPv4 address associated with the Cable (i.e., RF MAC) interface. Information Model Mapping: CM-SP-CCAP-OSSIv3.1 CmtsCmRegStatus::Ipv4Addr This attribute denotes the IPv6 address of the CM. If the CM has no Internet address assigned, or the Internet address is unknown, the value of this attribute is the all zeros address. Information Model Mapping: CM-SP-CCAP-OSSIv3.1 CmtsCmRegStatus::Ipv6Addr This attribute denotes the IPv6 local scope address of the CM. Information Model Mapping: CM-SP-CCAP-OSSIv3.1 CmtsCmRegStatus::Ipv6LinkLocal This attribute denotes the queuing services the CM registered and will always report DOCSIS 1.1 QoS mode since DOCSIS 1.0 CoS mode was deprecated in DOCSIS 3.1. Information Model Mapping: CM-SP-CCAP-OSSIv3.1 CmtsCmRegStatus::QosVersion DOCSIS 1.0 CoS mode DOCSIS 1.1 QoS mode This attribute denotes the current CM connectivity state. Returned status information is the CM status as assumed by the CMTS. Information Model Mapping: CM-SP-CCAP-OSSIv3.1 CmtsCmRegStatus::Value This attribute denotes the last time the CM registered. Information Model Mapping: CM-SP-CCAP-OSSIv3.1 CmtsCmRegStatus::LastRegTime This attribute indicates which, if any, of the Energy Management Features are enabled for this CM. If this attribute returns em1x1Mode(0) bit set, the CM is configured with the Energy Management 1x1 Feature enabled. If this attribute returns all bits cleared, the CM will not request to operate in any Energy Management mode of operation. Note: This attribute only indicates if an Energy Management Feature is enabled/disabled via the CM config file and registration request/response exchange and does not indicate whether the CM is actively operating in an Energy Management Mode. Information Model Mapping: CM-SP-CCAP-OSSIv3.1 CmtsCmRegStatus::EnergyMgtEnabled This attribute indicates whether the CM is currently operating in an Energy Management Mode. If this attribute returns em1x1Mode(0) bit set, the CM is operating in Energy Management 1x1 Mode. If this attribute returns all bits cleared, the CM is not operating in any Energy Management Mode. This attribute always returns 0x00 (no bits set) in the case when EnergyMgtEnabled is set to 0x00 (no Energy Management Features enabled). Information Model Mapping: CM-SP-CCAP-OSSIv3.1 CmtsCmRegStatus::EnergyMgtOperStatus This attribute indicates the total time duration, in seconds since registration, the CM identified by CmRegStatusId has been in Energy Management 1x1 mode, as controlled by the DBC-REQ Energy Management 1x1 Mode Indicator TLV. seconds Information Model Mapping: CM-SP-CCAP-OSSIv3.1 CmtsCmEmStats::Em1x1ModeTotalDuration