DOCSIS-CM_3.5.1-A.3 is an auxiliary schema which defines CM information. Revision History: 3.5.1-A.1 Initial version. 3.5.1-A.2 Revised version includes ECN OSSIv3.0-N-12.1073-3 and published as I20. 3.5.1-A.3 Revised version includes ECN OSSIv3.0-N-12.1083 and published as I21. DOCSIS 3.0 Operations Support System Interface Specification CM-SP-OSSIv3.0-I21-130404, Annex C. Contains the MAC Address of the CM. If the CM has multiple MAC Addresses, it contains the MAC address associated with the Cable (i.e., RF MAC) interface. When the record is a Group Service Flow, the MAC address should contain a multicast address compliant with either [RFC 2464] or [RFC 1112] as applicable Contains the id value to uniquely identify a CM. Contains the IPv4 address of the CM. If the CM IPv4 address is unassigned or unknown, it contains an empty string. If the CM has multiple IPv4 addresses, it contains the IPv4 address associated with the Cable (i.e., RF MAC) interface. Contains the IPv6 address of the CM. If the CM IPv6 address is unassigned or unknown, it contains an empty string. Contains the IPv6 Link Local address of the CM. If the CM IPv6 Link Local address is unassigned or unknown, it contains an empty string. This attribute denotes the queuing services the CM registered, either DOCSIS 1.1 QoS or DOCSIS 1.0 CoS mode. DOCSIS 1.0 CoS mode DOCSIS 1.1 QoS mode Contains the current Cable Modem connectivity state, as specified in the OSSI Specification. Returned status information is the CM status as assumed by the CMTS. other initialRanging rangingAutoAdjComplete startEae startDhcpv4 startDhcpv6 dhcpv4Complete dhcpv6Complete startConfigFileDownload configFileDownloadComplete startRegistration registrationComplete operational bpiInit forwardingDisabled rfMuteAll Contains the date and time value when the CM was last registered. This attribute indicates which, if any, of the Energy Management Features are enabled for this CM. If this attribute returns em1x1Mode(0) bit set, the CM is configured with the Energy Management 1x1 Feature enabled. If this attribute returns all bits cleared, the CM will not request to operate in any Energy Management mode of operation. Note: This attribute only indicates if an Energy Management Feature is enabled/disabled via the CM config file and registration request/response exchange and does not indicate whether the CM is actively operating in an Energy Management Mode. This attribute indicates whether the CM is currently operating in an Energy Management Mode. If this attribute returns em1x1Mode(0) bit set, the CM is operating in Energy Management 1x1 Mode. If this attribute returns all bits cleared, the CM is not operating in any Energy Management Mode. This attribute always returns 0x00 (no bits set) in the case when EnergyMgtEnabled is set to 0x00 (no Energy Management Features enabled). This attribute indicates the total time duration, in seconds since registration, the CM identified by Id has been in Energy Management 1x1 mode, as controlled by the DBC-REQ Energy Management 1x1 Mode Indicator TLV.